Ang Gabay sa Sukat at Fit ng Cherry

Gabay sa Sukat at Akma ng Sex Toy, Lingerie, at Kostyum

Hindi sigurado kung anong sukat ng lingerie o sukat ng produkto ang pipiliin? Alamin kung paano sukatin ang sukat ng damit, intindihin ang haba at lapad ng insertable, ikumpara ang lalim ng masturbator, mga produktong maaaring isuot, at nominal na lapad ng condom. Gamitin ang gabay upang paliitin ang iyong mga pagpipilian, pagkatapos ay kumpirmahin ang eksaktong mga detalye at tsart ng sukat sa pahina ng produkto.

  • Measure first
  • Use filters to narrow
  • Confirm the exact product page

One source of truth

How sizing works on CherryAffairs

The guide explains. Filters narrow. The product page confirms.

Guide

Understand the measurement

Learn what to measure and how to interpret common product dimensions.

Collection

Narrow the catalogue

Use grouped filters such as Wearable Fit and Insertable Length to reduce the choices.

Product page

Check the exact item

Review the actual variants, manufacturer measurements and size-chart image before ordering.

!

Do not choose from the filter label alone

Broad groups make browsing easier, but brands and product designs differ. The exact product page remains the final reference.

Lingerie & costumes

How to Measure for Lingerie and Costumes

Your normal clothing label is only a starting point. Measure yourself, then compare those measurements with the chart displayed inside the exact product’s specifications.

Body measurement points for lingerie and costumes Diagram showing bust, underbust, natural waist, low waist, hips and torso length. Bust Underbust Natural waist Low waist Hips Torso length
Keep the measuring tape level and comfortably close to the body. Do not pull it tight.
Bust

Measure around the fullest part while keeping the tape level.

Underbust

Measure directly beneath the bust. This matters most for bras and structured tops.

Natural waist

Measure around the narrowest part of your torso without pulling the tape tight.

Low waist

Measure below the natural waist where lower-rise garments sit.

Hips

Measure around the fullest part of your hips and seat.

Torso length

Especially useful for bodysuits, costumes and garments with limited vertical stretch.

Product typeMeasurements to prioritiseCheck on the product page
Bras and adhesive brasBust and underbustBand, cup and regional-size conversion
Babydolls and chemisesBust, then waistStretch, cup range and adjustable straps
Bodysuits and costumesBust, waist, hips and torso lengthGarment cut and vertical stretch
Panties and briefsWaist and hipsRise and stretch
Bodystockings and hosieryHips, height and stretchOne-size range and material elasticity
Men’s underwearWaistPouch design and brand-specific fit
S/M and M/L

A combined range, not proof that the garment fits every body within both labels.

O/S or One Size

A manufacturer-defined measurement range. It does not mean universal fit.

Queen or Plus O/S

A separate extended range. Always check the displayed chart.

1X/2X and 3X/4X

Plus-size groupings that vary substantially between brands.

How the filter works

Wearable Fit is a broad discovery tool

It groups products according to the actual clothing sizes stored on each product. It does not replace the brand-specific chart shown on the product page.

XS-SSmaller labelled sizes
M-LMedium and larger standard sizes
XL+XL, Queen and plus-size availability
One SizeStretch or adjustable one-size products
!

Check the chart before ordering

Brand sizing varies, and intimate products are subject to hygiene restrictions. Compare your measurements with the exact chart shown on the product page, or contact us before ordering if the fit is unclear. Review the Returns & Warranty Policy for the current terms.

Insertable toys

How to Read Insertable Length, Width and Diameter

Compare insertable length together with width, maximum diameter, shape, taper and flexibility. Total length alone rarely tells the full story.

Insertable toy measurement diagram Diagram comparing total length, insertable length, maximum diameter and non-insertable base. Total length Insertable length Maximum diameter Non-insertable base
Manufacturer diagrams and specifications take priority because shapes and measurement points differ.
Total length

The full product from end to end, including handles, bases or controls.

Insertable length

The portion intended to enter the body. It may be shorter than the total length.

Width or diameter

The straight distance across the product at the measured point.

Circumference

The distance around the product. Approximate circumference equals diameter multiplied by 3.14.

Maximum diameter

The widest insertable point, which may matter more than average shaft width.

Taper and flexibility

A gradual taper or flexible material can feel different from a blunt or firm design of the same dimensions.

How the filter works

Insertable Length groups exact product measurements into broad bands

The product metafield stores the manufacturer-provided measurement. Search & Discovery then groups those values to make comparison easier.

XSUp to 8 cmCompact
S9-12 cmShort
M13-15 cmMedium
L16-18 cmLong
XL19-22 cmExtra-long
XXL23 cm+Very long

Quick converter

Diameter and circumference

Use this only as an approximate conversion. Confirm the manufacturer’s exact specification.

Enter a measurement

Chart converter

Centimetres and inches

Useful when your body measurements and a supplier size chart use different units.

Enter a measurement

Important: These bands make products easier to compare. They are not experience-level or comfort guarantees.

Masturbators

How Masturbator Size and Canal Length Are Measured

Manufacturers may report overall length, internal depth or usable canal length. Read the product specifications before comparing two products.

01

Usable canal length

The internal depth available for use. This may be shorter than the external product body.

02

Opening and stretch

Opening width, sleeve elasticity and texture affect fit differently from length.

03

Open or closed end

Open-ended sleeves can accommodate length differently from closed-ended products.

04

Suction and pressure

Adjustable air, pressure or tightness can matter more than the outside dimensions.

i

How to use the existing filter

Your Insertable Length filter groups the exact manufacturer measurements stored on each product. Treat it as a practical comparison tool, then confirm whether the listed value means internal depth, usable canal length or another measurement on the product page.

Rings & wearable toys

How to Size Rings, Harnesses and Wearable Toys

Clothing labels are not appropriate for every wearable product. Fixed rings, stretch rings, harnesses and wearable vibrators each use different fit information.

Fixed rings

Inner diameter

Use the opening measurement, not the product’s outside width.

Stretch rings

Material and maximum stretch

Check the manufacturer’s recommended fit range and do not assume every elastic material stretches equally.

Harnesses

Waist and thigh range

Look for minimum and maximum adjustable measurements.

Wearable vibrators

Adjustability and placement

Check straps, magnets, garment compatibility and intended body placement.

Cages and sleeves

Internal dimensions

Confirm internal length and diameter rather than relying on the overall product size.

Unsure?

Choose adjustable first

An adjustable design is usually easier to assess when your exact fit is uncertain.

Condoms

How Condom Nominal Width and Fit Work

Nominal width is the condom’s flat width. Different brands can use different marketing labels for similar measurements.

Nominal widthFlat width of the condom

It is not the same as diameter or circumference. Always check the exact package or product specification.

Common questions

Size and fit questions

Open a question for the practical answer.

Dapat ko bang gamitin ang karaniwang sukat ng aking damit?

Gamitin ito bilang panimulang punto lamang. Sukatin ang iyong sarili at ihambing ang mga sukat na iyon sa tsart ng sukat na makikita sa eksaktong pahina ng produkto. Maaaring malaki ang pagkakaiba ng sukat depende sa tatak.

Ano ang ibig sabihin ng One Size?

Ang One Size ay nangangahulugang ang gumawa ay nagdisenyo ng damit para sa isang tinukoy na saklaw ng sukat. Hindi ito nangangahulugang pangkalahatang sukat. Tingnan ang tsart ng sukat na ipinapakita sa pahina ng produkto.

Ano ang dapat kong gawin kung ako ay nasa pagitan ng mga sukat ng damit?

Bigyang-priyoridad ang bahaging hindi gaanong nababago o pinaka-istrukturado ng kasuotan, pagkatapos suriin ang materyal, kakayahang mag-stretch, at mga tampok na maaaring i-adjust ng produkto. Makipag-ugnayan sa amin bago mag-order kung hindi malinaw ang tsart o sukat.

Paano ko susukatin ang aking sarili para sa lingerie?

Sukatin ang iyong dibdib sa pinakamalapad na bahagi, ang iyong natural na baywang sa pinakamakitid na bahagi, at ang iyong balakang sa pinakamalapad na bahagi. Ang ilang mga bra ay nangangailangan din ng sukat sa ilalim ng dibdib, habang ang mga bodysuit at costume ay maaaring mangailangan ng haba ng torso. Ihambing ang iyong mga sukat sa tsart na makikita sa eksaktong pahina ng produkto.

Pareho ba ang kabuuang haba at ang haba na maaaring ipasok?

Hindi. Kasama sa kabuuang haba ang buong produkto. Ang insertable length ay ang bahagi na idinisenyo upang ipasok sa katawan at maaaring hindi kasama ang hawakan, base, o seksyon ng kontrol.

Pareho ba ang lapad at diyametro?

Minsan, ngunit hindi palagi. Ang diameter ay tumutukoy sa tuwid na distansya sa kabila ng isang bilog na bahagi. Maaaring gamitin ng tagagawa ang lapad para sa isang hindi regular o hindi bilog na hugis, kaya't tingnan ang diagram o konteksto ng espesipikasyon.

Anong haba ng insertable ang dapat piliin ng isang baguhan?

Walang pangkalahatang sukat para sa mga baguhan. Mahalaga ang haba, pinakamalaking lapad, taper, hugis, kakayahang yumuko, at layunin ng paggamit. Gamitin ang mga filter band para magkumpara, hindi bilang garantiya ng kaginhawaan.

Paano ako pipili ng sukat ng dildo o vibrator?

Ihambing ang haba na maaaring ipasok, pinakamalaking diameter, hugis, taper, at kakayahang yumuko ng materyal. Huwag pumili base lamang sa kabuuang haba dahil maaaring bahagi ng produkto ang hawakan, base, o seksyon ng kontrol.

Saan ipinapakita ang haba na maaaring ipasok?

Buksan ang pahina ng produkto at tingnan ang Mga Espesipikasyon. Kapag nagbibigay ang tagagawa ng sukat na maaaring ipasok, ito ay ipinapakita doon at ginagamit upang ilagay ang produkto sa kaukulang grupo ng filter na Haba ng Maaaring Ipasok.

Paano sinusukat ang mga sukat ng masturbator?

Maaaring ilista ng mga tagagawa ang kabuuang haba ng produkto, panloob na lalim, o magagamit na haba ng kanal. Suriin ang eksaktong salita sa mga espesipikasyon ng produkto bago ikumpara ang mga produkto.

Saan ko makikita ang eksaktong tsart ng sukat ng lingerie?

Buksan ang pahina ng produkto at palawakin ang Mga Espesipikasyon. Ang mga produktong may kasamang tsart ay nagpapakita ng larawan ng tsart ng sukat na partikular sa tatak doon.

Maaari ko bang isauli ang isang item kung hindi ito angkop sa aking sukat?

Ang mga intimate na produkto ay may mga paghihigpit sa kalinisan. Suriin ang Patakaran sa Pagbabalik at Warranty bago mag-order at makipag-ugnayan sa amin bago bumili kung hindi malinaw ang impormasyon tungkol sa sukat.

Still unsure?

Suriin ang eksaktong produkto, o magtanong sa amin nang pribado

Ang pahina ng produkto ang huling sanggunian para sa eksaktong sukat at mga sukat. Makipag-ugnayan sa amin kung may hindi malinaw na espesipikasyon bago mag-order.